ITI NCVT WELDER TRADE QUIZ-1 ATTEMPT NOW

Trade NameWelder
Course Duration1 Year
Minimum Qualification8th Pass.
Apprenticeship Training2 Years including 1 year basic Training
Skills Acquired
1 Electric arc welding
2 Gas welding
3 CO2 MIG welding
4 TIG welding
5 Plasma cutting and gas cutting.
Employment Option
1 Electric arc welder
2 Gas Welder
3 CO2 MIG Welder
4 TIG welder
5 Gas Cutter

This Quiz is regarding to WELDER trade semester -1(Induction Training and Welding Process) these is multiple type question was ask old ncvt & scvt exam.this mock test has 20 Questions & is useful to other computer trade students also. Please Like & Share

20
Created on By admin

WELDER QUIZ-1

પ્રાથમિક શિક્ષકોનો ગ્રેડ પે 4200થી ઘટાડીને 2800 કરાયો છે. સરકારના નિર્ણય નો તમે સખત વિરોધ કરો છો ?

What should be the angle for a double “J”
butt joint? | एक डबल ʺजेʺ बट जॉइिंट केनलए कोण क्या
होना िानहए?

Which of the following metal is used for
making nozzle in gas welding? | निन्मलिखित में से किस धातु का उपयोग गैस वेल्डिंग में नोज़ल बनाने के लिए किया जाता हे
धातुका उपयोग गैस वेल्डिंग र्ेंनोजल बनानेकेनलए नकया
जाता है?

Which Material is used in Manufacture gas
cylinder ? | निर्माण गैस सिलेंडर में किस सामग्री का उपयोग किया जाता हे

How many pressure gauges are in regulator
gas welding plant? | रेग्युलेटर गैस वेल्डिंग प्लांट में कितने प्रेसर गेज होते हे

Which nozzle shown in figure indicates
good condition nozzle? | चित्र में दिखाए गए नोज़ल में अच्छी स्थिति दीखता हे

What is name of blowpipe part ‘x’ shown in
figure? | चित्र में दिखाए गए ब्लोपाइप भाग x का क्या नाम हे

Question Image

Which nozzle shown in figures requires
replacement of nozzle? | चित्र में दखाए गए कौन से
नोजल की प्रनतस्थापन की आवश्यकता है?

Question Image

Which of the following injury is common in
gas welding? | निम्नलिखत में कौन सी चोट गैस वेल्डिंग में आम है?

What safety measure to be taken while
performing hacksaw cutting? | हैकसॉ कटिंग करते
समय क्या सुर्क्षा उपाय कीया जाना चाहिये ?

What is marked as part ‘x’ of a portable
cutting machine? | पोटेबल कंटींग मशीन के भाग ’x’ के
रूप में र्क्या निहचत है?

Question Image

Which is the hottest point in a oxyacetylene
flame? | ऑक्सासेनटलीन ज्वाला में सबसे गर्म बिंदु कोनसा होता है?

Which nozzle size is selected to cut 15 mm
thick MS plate? | 15 मीमी मोटी ईएमएस प्लेट को काटने की लिये किस नोज़ल आकर का चयन किया जाता है?

What are the gas flame combination used for
welding ferrous and non ferrous alloys? | कौन सी
गैस वैल्डिंग फलेर् लौह तथा अलौह धातुओिंकी वैल्डिंग के
नलए प्रयोग होती है?

Which file is having it’s width parallel
through out it’s length? | किस फाइल की चौड़ाई लम्बाई तक समांतर होती है ?

What is the type of clamp? | क्लैंप का प्रकार्
कौन सा है?

Question Image

Which is to wear for safety while handling
thin sheets? | पतली चादर को संभालने के लिये कौन सी सुरक्षा को अपनाया जाता हैं

Which part of the hammer fits into the
handle for it’s rigidity? | हथौड़ा का कौन सा हस्सा
इसकी कठोर्ता को संभालने के लिये इसके हैंडल में फ़ीट किया जाता हे ?

Question Image

Which is used for handling hot jobs? |
किसका प्रयोग गर्म जॉब को पकड़ने के लिये कया जाता ह

Which operation is to remove burrs from a
plate after cutting? | काटनेके बाद एक प्लेट सेबर्र्स
नीकालने के लिये कौन सा ऑपर्ेशन किया जाता है?

Your score is

The average score is 42%

0%

BEST LUCK

WELDER Trade New Syllabus Download Here

Welder (GMAW & GTAW) Level – 3 Passed 8th Class with Science and Mathematics under 10+2 system of Education or its equivalent. 1 Year (2 Semesters) 2016

— 44 Welder (Pipe) Level – 3 Passed 8th Class pass. 1 Year (2 Semesters) 2016

— 45 Welder (Structural) Level – 3 Passed 8th Class. 1 Year (2 Semesters) 2016

— 46 Welder (Fabrication & Fitting) Level – 3 Passed 8th Class pass. 1 Year (2 Semesters) 2016 —

47 Welder (Welding & Inspection) Level – 3 Passed 8th Class with Science and Mathematics under 10+2 system of Education or its equivalent. 1 Year (2 Semesters) 2016 —

Apprentice Registration Click Here

Click Here To View Theory Paper-1 (Semester-2)

Click Here to View Practical Papers(Semester-4)

Click Here To View Practical Papers(Semester-1)

Click Here To Download WS-ED Paper-II(Semester-1) 

Click Here To View Theory & Es Papers(Semester-1)

For More Trades Question Papers Or Any Query Please Comment In Comment Box only

Leave a Reply

Your email address will not be published.

error: Content is protected !!
%d bloggers like this: